50/125

  1. What is 10G Fiber

    What is 10G Optical Fiber? The 10 gigabit Ethernet (10GE or 10GbE or 10 GigE) standard was first published in 2002 as IEEE Std 802.3ae-2002. It defines a version of Ethernet with a nominal data rate of 10 Gbit/s, ten times as fast as gigabit Ethernet. 10 gigabit Ethernet defines only full duplex links which can be connected by switches. Half duplex operation and CSMA/CD (carrier sense multiple access with collision detection) do not exist in 10GbE. The 10 gigabit Ethernet standard encompasses a number of different physical layer (PHY) standards. It remains to be seen which of these PHYs will gain widespread commercial acceptance. However a networking device may support different PHY types by means of pluggable PHY modules and SFP+ is a popular module interface. At the time that the 10 gigabit Ethernet standard was developed, there was much interest in 10GbE as a WAN transport and this led to the introduction of the concept of the WAN PHY for 10GbE. This operates at a slightly
    Read more »
  2. LC-SC 10g OM3 multi-mode fiber optic cable 50/125 starting at $17.99

    LC to SC Multimode Duplex High Speed 10 Gigabit Aqua Fiber Optic Ethernet Patch Cable OM3 50/125

    Information
    • 10G OM3 MMF
    • Aqua Fiber Optic Cable
    • Multi-mode
    • Duplex
    • 50/125
    • Avaiolable Connectors: LC, SC
    Applications
    • 10 Gigabit Ethernet / 10GBE
    • IEEE Std 802.3se-2002
    • Networking Solution
    • High Speed Internet
    • Communications
    • Data
    Available Lengths: FGX-LCSC-01M FGX-LCSC-02M FGX-LCSC-03M
    Read more »
  3. 10g 50/125 OM3 Multi-mode Aqua Fiber Optic Cable Starting at $17.99

    10g 50/125 OM3 Multi-mode Aqua Fiber Optic Cable Starting at $17.99

    50/125 is one of the most commonly used multimode optical fiber; the other commonly used is 62.5/125 types. The 50 and 125 is measurement by the unit micron. One meter is equal to one million micron. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
    Information
    • 10G OM3 MMF
    • Aqua Fiber Optic Cable
    • Multi-mode
    • Duplex
    • 50/125
    • Avaiolable Connectors: LC, SC
    Read more »
  4. APC Angle Polished and UPC Ultra Polished 9/125 Singlemode Duplex Fiber Optic Patch Cable

    We have known that PC, UPC, APC is standard of the fiber optic connectors, PC, UPC, APC are short for: Physical Contact (PC), Ultra Physical Contact (UPC), and Angled Physical Contact (APC), they are actually the polish style of fiber optic ferrules. Below is a picture of the fiber optic ferrules. Unlike copper cables with copper thread in the connectors as connection media, fiber optic connectors are with these ceramic ferrules for connection, and different fiber optic connectors the ferrule size and length and polish styles are different, as can be seen on the picture. Such ferrules is inside the fiber optic connectors and with fiber glass from the fiber optic cable to plug into the ferrule for linking.  The different polish of the fiber optic connector ferrules result in different performance of them, mainly on the back reflection (return loss),.Generally, PC type is required at least 40dB return loss or higher, UPC is 50dB or higher, APC
    Read more »