10GB Fiber Cables

ConnectZone.com stocks over 10,000 fiber optic cables at any time having one of the largest sections of not just 10GB fiber but also SM & MM fiber as well. 10GB Fiber Cords (OM3 fiber) come standard with ceramic ferrules and deliver 10 gigabit data speed in intensive bandwidth situations. Our OM3 fiber jumpers are typically 5x faster than traditional 50/125 Fiber patch cords. The 10Gb Optical Cords work with both LED & VCSEL. ConnectZone provides OM3, laser optimized MM 50/125 Aqua optical patch cords. These are engineered to meet and exceed the IEEE 802.3 specifications. Our 10GBE optical cords are 100% optically tested for maximum performance. The ConnectZone FGX series of

Custom colored singemode fiber optic cables smf 9/125

Please select a custom color

Black singlemode fiber optic cables 9/125 duplex

Product Spotlight - Inline Fiber Optic Attenuators

---

An optical attenuator is a device used to reduce the level of an optical signal, either in free space or in an optical fiber. They are commonly used in fiber optic communications. Optical attenuators used in fiber optic communications systems may use a variety of principles for their functioning. Those using the gap loss principle are sensitive to the modal distribution ahead of the attenuator, and should be used at or near the transmitting end, or they may introduce less loss than intended. Optical attenuators using absorptive or reflective techniques avoid this problem. Because an air gap is subject to variations from contamination etc, attenuators without air gaps (based on doping etc) are more stable over time. The basic types of optical attenuators are fixed, step-wise

Fiber Attenuators in Lynnwood

Connectzone.com stocks Fiber Optic Attenuators in Lynnwood Washington just minutes away from Seattle, Bellevue, and Redmond Washington.

Fiber Attenuators allow you to reduce the optical signal strength so the data can be heard on the far side (receiving side)

What is 10G Optical Fiber? The 10 gigabit Ethernet (10GE or 10GbE or 10 GigE) standard was first published in 2002 as IEEE Std 802.3ae-2002. It defines a version of Ethernet with a nominal data rate of 10 Gbit/s, ten times as fast as gigabit Ethernet. 10 gigabit Ethernet defines only full duplex links which can be connected by switches. Half duplex operation and CSMA/CD (carrier sense multiple access with collision detection) do not exist in 10GbE. The 10 gigabit Ethernet standard encompasses a number of different physical layer (PHY) standards. It remains to be seen which of these PHYs will gain widespread commercial acceptance. However a networking device may support different PHY types by means of pluggable PHY modules and SFP+ is a popular module interface. At the time that the 10 gigabit Ethernet standard was developed, there was much interest in 10GbE as a WAN transport and this led to the introduction of the concept of the WAN PHY for 10GbE. This operates at a slightly

   

Optical Fiber Cables

visit us: www.ConnectZone.com

Quick Links 10G Fiber Cable Angled/Ultra Polished Fiber Cable