Supplier of Custom Colored Fiber Optic Cables

Custom colored multimode fiber patch cords

Black multimode fiber optic cables 62.5/125 duplex

A fiber-optic technique is similar to the copper wire technique that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines in lieu of using electronic pulses to transmit information down copper lines. Taking a look at the parts in a fiber-optic chain will give a better understanding of how the technique works together with wire based systems. Where copper cabling makes use of electricity to transmit signals from finish to another, fiber optics use light pulses to accomplish the same purpose. The fiber cable is made of a transparent glass core surrounded by a mirror like covering called cladding. Light passes through the cable, bouncing off the cladding until it reaches the other finish of the fiber channel - this is called total

Quick Links: F29-FCFC-01M F29-FCFC-02M F29-FCFC-03M F29-FCFC-05M F29-FCFC-10M F29-FCLC-01M F29-FCLC-02M F29-FCLC-03M F29-FCLC-05M F29-FCLC-10M F29-FCSC-01M F29-FCSC-02M F29-FCSC-03M

LC to ST Blue Multimode Duplex High Speed Fiber Optic Ethernet Patch Cable 62.5/125

Blue Multimode Fiber Optic Cable Lengths Available: 1 Meter blue fiber cord LC to ST 2 Meter blue fiber cord LC to ST 3 Meter blue fiber cord LC to ST 4 Meter blue fiber cord LC to ST 5 Meter blue fiber cord LC to ST 6 Meter blue fiber cord LC to ST 7 Meter blue fiber cord LC to ST 8

9/125 Singlemode High Speed Fiber Optic Duplex Patch Cables

Single-mode fiber is a type of fiber optic cable through which only one light signal can travel at a time. Because single-mode fiber is more resistant to attenuation than multi-mode fiber, it can be used in significantly longer cable runs. The core of a single-mode fiber is normally 9 microns wide. A micron is one millionth of a meter. The single-mode cables are the most important cables for long-haul use (carrier and Internet core). The cable has a small core (7 to 10 microns) that forces the light to follow a more linear single path down the cable, as opposed to the multipath reflections of multimode cable. However, another form of dispersion, called chromatic dispersion,

We have known that PC, UPC, APC is standard of the fiber optic connectors, PC, UPC, APC are short for: Physical Contact (PC), Ultra Physical Contact (UPC), and Angled Physical Contact (APC), they are actually the polish style of fiber optic ferrules. Below is a picture of the fiber optic ferrules. Unlike copper cables with copper thread in the connectors as connection media, fiber optic connectors are with these ceramic ferrules for connection, and different fiber optic connectors the ferrule size and length and polish styles are different, as can be seen on the picture. Such ferrules is inside the fiber optic connectors and with fiber glass from the fiber optic cable to plug into the ferrule for linking.  The different polish of the fiber optic connector ferrules result in different performance of them, mainly on the back reflection (return loss),.Generally, PC type is required at least 40dB return loss or higher, UPC is 50dB or higher, APC