attenuator

  1. Connectzone Lynnwood Wa Fiber Optic Attenuators

     Fiber Attenuators

      [caption id="" align="alignnone" width="150"]Fiber Optuics Attenuator LC Attenuator[/caption] Connectzone, Lynnwood Washington is your best source for fiber-optic attenuators and fiber-optic cables. Our Fiber Singlemode 9/125   Attenuators are available from 1dB to 25dB for immediate shipping. Connectzone offers a wide range of fiber optic Attenuators.  Available for Singlemode 9/125, Multimode 50/125 and Multimode 62.5/125 applications.  Our Male to Female buildout Optical Attenuation (pads) are available in all fiber modes. LC, SC, ST, LC/APC, SC/APC, FC and FC/APC types.   Our most popular type is the build out
    Read more »
  2. APC Angle Polish FC Fiber Optic Attenuators

    angle polished fiber optic attenuator fca

    Inline Fiber Optic Attenuators

    An optical attenuator is a device used to reduce the level of an optical signal, either in free space or in an optical fiber. They are commonly used in fiber optic communications. Optical attenuators used in fiber optic communications systems may use a variety of principles for their functioning. Those using the gap loss principle are sensitive to the modal distribution ahead of the attenuator, and should be used at or near the transmitting end, or they may introduce less loss than intended. Optical attenuators using absorptive or reflective techniques avoid this problem. Because an air gap is subject to variations from contamination etc, attenuators without air gaps (based on doping etc) are more stable over time. The basic types of optical attenuators are fixed, step-wise variable, and continuously variable. Inline attenuators are incorporated into patch cables. The alternative 
    Read more »
  3. Product Spotlight - Inline Fiber Optic Attenuators

    Fiber Attenuator Connectzone

    Product Spotlight - Inline Fiber Optic Attenuators


    An optical attenuator is a device used to reduce the level of an optical signal, either in free space or in an optical fiber. They are commonly used in fiber optic communications. Optical attenuators used in fiber optic communications systems may use a variety of principles for their functioning. Those using the gap loss principle are sensitive to the modal distribution ahead of the attenuator, and should be used at or near the transmitting end, or they may introduce less loss than intended. Optical attenuators using absorptive or reflective techniques avoid this problem. Because an air gap is subject to variations from contamination etc, attenuators without air gaps (based on doping etc) are more stable over time. The basic types of optical attenuators are fixed, step-wise
    Read more »
  4. FCA Fiber Attenuators in Lynnwood

    Fiber Attenuators in Lynnwood

    Connectzone.com stocks Fiber Optic Attenuators in Lynnwood Washington just minutes away from Seattle, Bellevue, and Redmond Washington.

    FC APC Attenuator

    Fiber Attenuators allow you to reduce the optical signal strength so the data can be heard on the far side (receiving side)

    Read more »
  5. Fiber Optic Attenuator

    Fiber-optic attenuator

      http://www.connectzone.com/media/products/products%20resized/FA-1FCA_PIC1.jpgattenuator In-line fiber optic attenuators commonly are available from 1 dB to 25 dB allowing you to reduce the signal strength of your optical signal so it isn't overpowered at the receiving end of the optical link. Light travels over a small glass strand which is measured in nanometer (nm) wavelengths the strength of the wavelengths signal is measured in decibels (nm).t the sign A fiber-optic data connection has a light wave traveling over it which are transmitted over the optical=glass-medium  & “read” at the receiving end; if the signal is too strong at the receiving end then the receiver can’t read the information. As both sound and light are measured
    Read more »
  6. FC APC Fiber Optic Attenuators Angle Polish

    Fiber Optic Inline Attenuators FC APC Polish FC APC Fiber Attenuator   ConnectZone.com stock IS9001 FC APC Fiber Optical Single Mode Inline Attenuators from 1dB to 20dB. The ConnectZone.com FC Angle Polish Connectors are built to exceed telecordia standards.
    Read more »