cisco

  1. PWR-CAB-AC-USA Power Cord for ASR 9000

        ConnectZone has just released its Cisco Compatible PWR-CAB-AC-USA power cord for the Cisco ASR 9000 Series Router.

    PWR-CAB-AC-USA

    Power Cable for ASR 9000 PWR-CAB-AC-USA

    Cable specifications:

    • L6-20P - C21
    • 8 feet
    • 3 conductor 12Awg
    • Rated for 300V
    • ConnectZone brand
    ConnectZone also carries many other Cisco compatible cables to meet our customers' needs. Click HERE to view our other options. Be the first to know when new products are
    Read more »
  2. CAB-C19-CBN

    CAB-C19-CBN

    CAB-C19-CBN Connectzone carries the CAB–C19-CBN . This C19-C20m Power cable is 100% Cisco compatible & readily availble from stock  The CAB–C19-CBN is for use with your PDU or Cisco UCS 5108 blade chassis it is rated at 16A 250V. Standard Length of this Connectzone cable is 10 feet, but other lengtths are availabe on request contact [email protected]   Other cables for Cisco Connectzone also carries Fiber Attenuators LC Fiber Attenuators FC Fiber Atten

    Read more »
  3. AIR-ACC2537-060 antenna extension cable

    AIR-ACC2537-060 antenna extension cable the AIR-ACC2537-060 antenna extension cable coaxial cable is used for interconnecting the antennas and the radio devices. RP-TNC (M)- RP-TNC (F), 5 ft standard length, but this can be built to your specs   for the following Cisco Aironet devices
    • 1200
    • 1220
    • 1230
    • 1231
    • 1232
    • 1242
    • 1250
    • 1252
    • 1260
      www.Connectzone.com 5030 208th St sw, Suite B Lynnwood Wa 98036
    Read more »
  4. CAB-HD4-232FC

    Cab-HD4-232FC for $199.99 CAB-HD4-232FC ConnectZone.com also has the  Cab-HD4-232MT under $120.   The Cab-HD4-232FC cable is used to connect the Cisco 8 port Asynchronous  / Synchronous High speed wan card.   The Cab-HD4-232MT cable is used with the Cisco 8-Port Asynchronous/Synchronous High-Speed WAN Interface Card with 2 high-density 4-port connectors. Each connector supports four ports of EIA-232 with data communications equipment (DCE) or data terminal equipment (DTE) interfaces. All four ports on one cable use the same DTE/DCE mode. The Cisco Cards that this is normally used with is HWIC-4A/S & HWIC-8A/S-232
    Read more »
  5. CAB-HD8-ASYNC Cable

    Cisco CAB-HD8-ASYNC  in stock at  ConnectZone.com $99.99ea CAB_HD8-ASYNC The CAB-HD8-ASYNC High -density 8-port EIA-232 asynchronous cable for the Cisco HWIC-8A, HWIC-16A cards, is a 8-port EIA-232 10 foot cable with Micro VHDCI 68 Male to 8 RJ45 Males. The CAB-HD8-ASYNC is used with the following routers 1841, 1941, 2800, 2900, 3800, 3900. Please see our other Cisco cables. If you don’t see what you need Please contact us immediately at 1-425-212-4400 or [email protected] ConnectZone.com is located in Lynnwood Washington just 20 minutes north of Seattle. ConnectZone.com can
    Read more »
  6. Product Spotlight - CAB-STACK-10M=

    CAB-STACK Cisco Cables

    Product Spotlight - CAB-STACK-10M=


    Cisco systems Stackwise cable 10 meter (30 feet) connects Stackwise ports on 3750/3750-E Catalyst series and NME-XD-24ES-1S-P (alternate Part Number 72-2634-01) The CAB-STACK-10M is a longer version of the Stackwise cables being a full 7 meters longer than is offered by Cisco or any other manufacturer & is fully optimized for Gigabit Ethernet. The CAB-STACK Cables for Cisco Catalyst witches allow you to connect a combination of up to 9 Cisco Catalyst 3750/3750-E Stackable switches at (32 Gb/s) and to work together as a single unit. Our Cab-stack cables are optimized for a 32 Gigabit bi-directional Connection
    Technical Information:
    • Cisco CAB-STACK cable
    • Stackwise stacking cables
    • 32 Gb/s bi-directional connection
    • 72-2634-01
    • 10 meter
    Read more »
  7. Product Spotlight - Cisco CAB-AC=

    ConnectZone Cab-AC

    Product Spotlight - Cisco CAB-AC=


    Overview

    NEMA Rated 5-15P to IEC C13 power cords are used to plug electronic devices and computers into a standard 3-prong North American outlet or receptacle.  Rated for 13A, 125V.  Call for quantity discounts or custom lengths.

    Features

    • NEMA 5-15P plug
    • IEC C13 connector
    • 16/3 AWG
    • SJT jacket
    • Rated 13 Amps, 125 Volts

    Specifications

    Plug NEMA 5-15P
    Female IEC C13
    Lengths 1, 3, 6, 10, 15, 25 Foot
    Wire Gauge 16/3
    Color Black
    Jacket Type SJT
    Amperage 13 Amps
    Voltage 125V
    Read more »
  8. Cisco Boosts Stadium Wifi, Makes MLB slightly More Tolerable For The Internet-Obsessed

    Cisco Boosts Stadium Wifi, Makes MLB slightly More Tolerable For The Internet-Obsessed


    Anyone who's been in a packed stadium or concert venue knows better than to expect to be able to browse the web or even check email, unless of course your device happens to be compatible with a certain underutilized data-only network. A new initiative from Cisco, however, aims to bring connectivity to the over-saturated masses. The company's Connected Stadium WiFi bundles the Aironet 3500p access point, designed specifically for "high-density stadium and arena deployments," with strategically placed antennas that target fewer seats with the same amount of throughput -- likely similar to the 884-device network AT&T deployed at Cowboys Stadium for Super Bowl XLV. We hope the lighter load placed on carriers -- and already sky high ticket prices -- would help make Connected Stadium a free service, but key words like "purchasing" and "monetizeable" in the networking company's announcement
    Read more »
  9. CAB-E1-RJ45BNC E1 Unbalanced Cisco Cable 72-1338-01

    cab-e1-rj45bnc cisco unbalanced cable cab-e1-rj45bnc unbalanced cisco cable cisco cable cab-e1-rj45bnc

    CAB-E1-RJ45BNC (72-1338-01) Cisco Cable

    CAB-E1-RJ45BNC 10 foot Cisco E1 unbalanced cable. This cable consist of a single RJ45 male connector to dual BNC male connectors. CAB-E1-RJ45BNC cables are typically used to connect DS3 or T3 WAN connections to a router on your local side.
    Technical Information:
    • Cisco unbalanced cable
    • CAB-E1-RJ45BNC
    • 72-1338-01
    • 72-1338-02
    • Connector 1: 1x RJ45 male
    • Connector 2: 2x BNC male
    Applications:
    • Typically used for DS3 or T3 WAN connections
    • Networking
    • Data
    • Communication
    • Router on local side

    How to use a CAB-E1-RJ45BNC

    Typical Cisco cards used to interface with would be the PA-T3, PA-MC-T3, PA-T3+, PA-2T3,
    Read more »
  10. Top 5 Reasons You Should Buy from ConnectZone

    Be ready for May 21, 2011; its the first day to read this blog entry. Be prepared for Cable-gedon with a top-quality supplier like ConnectZone.

    1. We got Weird Stuff Need an exotic Cisco cable, like the Want a red fiber optic cable? We are your best shot. And we have no Judgement on your choice of colors. Looking for a 10 meter
    2. We got Mad Skills Our production department can build all kinds of cable assemblies for you.
    Read more »
Page