CAB-E1-RJ45BNC (72-1338-01) Cisco Cable
CAB-E1-RJ45BNC 10 foot Cisco E1 unbalanced cable. This cable consist of a single RJ45 male connector to dual BNC male connectors. CAB-E1-RJ45BNC cables are typically used to connect DS3 or T3 WAN connections to a router on your local side.
Technical Information:
- Cisco unbalanced cable
- CAB-E1-RJ45BNC
- 72-1338-01
- 72-1338-02
- Connector 1: 1x RJ45 male
- Connector 2: 2x BNC male
|
Applications:
- Typically used for DS3 or T3 WAN connections
- Networking
- Data
- Communication
- Router on local side
|
How to use a CAB-E1-RJ45BNC
Typical Cisco cards used to interface with would be the PA-T3, PA-MC-T3, PA-T3+, PA-2T3, PA-2T3+, NM-1A-T3, and NM-1E/T3. The telco provider will typically terminate to an RJ-45 jack at the wall. This cable converts the RJ45 to dual bayonet style BNC connectors that twist and lock with a quarter turn.
Cisco Networking Cables
Cisco is an American-based multinational corporation that designs and manufactures consumer electronics, networking, voice, and communications technology and services. Connectzone stocks a large variety of cables for Cisco equipments and devices such as routers, switches, servers and much more. Get connected today and find a connection that fit your networking needs.
More CAB-E1-RJ45BNC cables available along with alternate part numbers:
Looking for a custim length Cisco cable?
Please contact us and we will be happy to take care of your request...
Hours of operation: 8:00 AM - 5:00 PM Pacific Time
ConnectZone
Email: [email protected]
Phone:425.212.4400
Fax: 4252124394 |
|
12512 Beverly Park Road
Suite B1b
Lynnwood, WA 98087 |
Sign In
Create New Account