Clean up Your Data Closet Messy network wiring: avoid getting all tangled up BEFORE                     AFTER                     Ever decided to start some project and it just turns out to be a huge time suck? You take one step forward and momentarily bask in the success. Then, because of the sloppiness of the previous responsible party, you take two steps back. This can apply to many things; from the plumbing in your house to the wiring infrastructure in your network. In a recent post

ConnectZone.com stock's a large quantity of the CAB-DFC-OCTAL-3MF Cables which are used to connect the 36 pin connector on the octal T1/E1 card of the AS5400 to eight T1 or E1 lines.  As well at the 3meter CAB-DFC-OCTAL-3MF ConnectZone.com also stocks the following lengths

• Cab-Dfc-Octal-1MF 1 meter
• Cab-Dfc-Octal-2MF 2 meters
• Cab-Dfc-Octal-3MF 3 meters

As always we can build the CAB-DFC-OCTAL cables in a custom lengths. The CAB-DFC-OCTAL-3MF cable is used with the

ConnectZone.com has gotten another rather large shipment in of the CAB-AC-C6K-TWLK, AC  power cord for the Cisco Catalyst 6000 with the L6-20P Twist Lock connectors 10 feet long. The CAB-AC-C6K-TWLK has a NEMA L6-20P on one end & the square IEC-320-C19 on th4e other end. The Nema L6-20P connector plugs into the wall & then you give it a qurter turn to lock it in & ensure that it won't accidentally come unplugged.   ConnectZone.com Also carries this in other lengths like the 15 foot CAB-AC-C6K-TWLK-15 ConnectZone.com is not only your best source for CAB-AC-C6K-TWLK & other Cisco

http://www.connectzone.com/ Stocks all standard length Cisco Cab-stack Cables as well as manufactures custom Cab-stack cables up to 25 Meters.   Cab-Stack Cables are used for connecting or Daisy-Chaining multiple Cisco 3750 or 3750-E Stackable switches & is optimized for Gigabit Ethernet (aka 1000BaseT or GbE) allowing the Stack of switches to tied together as one switch. The standard length of Stack Cables are 1/2 meter Cisco Stacking Cable 1 Meter Cisco Stacking Cable

Connectzone provides Fiber Optic Y cables for redundancy in your Data Center. The  CAB-SMF-Y-SC Single Mode Fiber Optic Y cable allows 1 output device to send information to 2 input devices for redundancy in your Data Center.   ConnectZone.com stock many lengths of the following...

• MultiMode Fiber Patch Cords
• Single Mode Fiber Patch Cords
• Angle Polish APC Single Mode Patch Cords
• 10G Fiber optic patch Cords

as well as Y cables for immediate shipment, we can also manufacture with any type of connector that you may need suich as  SC , LC , ST, MPO.   Contact us today for more information