9/125

  1. Custom colored singlemode fiber optic cables smf 9/125 SALE !

    Custom colored singemode fiber optic cables smf 9/125

    Please select a custom color
    Black singlemode fiber optic cable Black singlemode fiber optic cables 9/125 duplex
    Read more »
  2. Single-mode 9/125 High Speed Fiber Optic Duplex Patch Cable

    9/125 Singlemode High Speed Fiber Optic Duplex Patch Cables

    Single-mode fiber is a type of fiber optic cable through which only one light signal can travel at a time. Because single-mode fiber is more resistant to attenuation than multi-mode fiber, it can be used in significantly longer cable runs. The core of a single-mode fiber is normally 9 microns wide. A micron is one millionth of a meter. The single-mode cables are the most important cables for long-haul use (carrier and Internet core). The cable has a small core (7 to 10 microns) that forces the light to follow a more linear single path down the cable, as opposed to the multipath reflections of multimode cable. However, another form of dispersion, called chromatic dispersion,
    Read more »
  3. APC Angle Polished and UPC Ultra Polished 9/125 Singlemode Duplex Fiber Optic Patch Cable

    We have known that PC, UPC, APC is standard of the fiber optic connectors, PC, UPC, APC are short for: Physical Contact (PC), Ultra Physical Contact (UPC), and Angled Physical Contact (APC), they are actually the polish style of fiber optic ferrules. Below is a picture of the fiber optic ferrules. Unlike copper cables with copper thread in the connectors as connection media, fiber optic connectors are with these ceramic ferrules for connection, and different fiber optic connectors the ferrule size and length and polish styles are different, as can be seen on the picture. Such ferrules is inside the fiber optic connectors and with fiber glass from the fiber optic cable to plug into the ferrule for linking.  The different polish of the fiber optic connector ferrules result in different performance of them, mainly on the back reflection (return loss),.Generally, PC type is required at least 40dB return loss or higher, UPC is 50dB or higher, APC
    Read more »