APC Angle Polished Fiber Jumpers

Fiber connectors with angle polished APC finishes are a very popular choice in the market today. APC finishes are made by polishing the fiber at an angle. The endface is polished at an 8-degree angle to the fiber cladding so that most return loss is reflected in to the cladding where it cannot interfere with the transmitted signal or damage the laser source. By angle polishing the fiber, reflections at the fiber-air interface are greatly reduced. Back reflection levels are stabilized, feedback issues are reduced.Single mode APC patch cords come in several flavors, though SC APC , FC APC and LC APC are the most common. Additionally, angle polish patch cords are necessary in DWDM applications. One drawback with angled polished connectors is that the tip of the fiber is not in the same plane as the tip of the ferrule. Therefore when one butts the ferrule against a flat cease, such as in a collimator receptacle, there is a gap between the cease and the finish of the fiber. Also, it is impossible to terminate correctly polish an APC connector with any consistency in the field. Since single mode fiber systems are sensitive to back reflections, APC polish is the most efficient type. As a result, APC connectors offer a superior RL performance of -65 dB. APC LC optic fiber patch cableshttp://www.connectzone.com/angled-polished-fiber.html are best for high bandwidth applications & long haul links since it offers the lowest return loss (RL) characteristics of connectors currently available. Connectzone.com is located in Lynnwood Washington just north of Seattle, Bellevue & Redmond   Connectzone.com is  a full service connectivity supplier including Fiber Optic, Cat5, Cat6, HDMI & Ds3 cables  & Cisco Cable.

Connectzone.com

12512 Beverly Park Road

Suite B1B

Lynnwood Wa 98087

Phone 425-212-4400

Fax 425-212-4394

  Contact lancew@connectzone.com or sales@connectzone.com