CAB-E1-RJ45BNC (72-1338-01) Cisco Cable

CAB-E1-RJ45BNC 10 foot Cisco E1 unbalanced cable. This cable consist of a single RJ45 male connector to dual BNC male connectors. CAB-E1-RJ45BNC cables are typically used to connect DS3 or T3 WAN connections to a router on your local side.

Technical Information: Cisco unbalanced cable CAB-E1-RJ45BNC 72-1338-01 72-1338-02 Connector 1: 1x RJ45 male Connector 2: 2x BNC male

Applications: Typically used for DS3 or T3 WAN connections Networking Data Communication Router on local side

---

How to use a CAB-E1-RJ45BNC

Typical Cisco cards used to interface with would be the PA-T3, PA-MC-T3, PA-T3+, PA-2T3,

Six Port Custom Jak Pak cables in Lynnwood

Flexible Multi-User Solution for Category 5e and 6 Networks

Connect Zone makes custom Jak-Paks cable assemblies, Located in the Great Pacific Northwest in the Seattle-Bellevue area . Available in Category 6 or Category 5e, the Jak-Pak provides a compact, flexible multi-user solution that can be structurally mounted or used in more temporary environments. Jak-Paks provide an additional field-termination option for delivering the renowned optimum performance of Clarity to the workstation, MUTOA or consolidation point. They are supplied with CAT 6 or CAT 5E  modular/110 easy-lace connections for the elevated performance of Clarity connectivity with a compact, six-port, field-installable

Bulk Cat5E Cable

 

---

Bulk Cat5e Cable (Cat5 cable) is primarily available in 3 different types, each type has a specific application. Bulk solid Category 5 cable, the most commonly used, is comprised of a Riser Rated (CMR) PVC jacket and solid core conductors. Solid core conductors allow the cable to be run long distances while maintaining performance, but reduces the number of times it can be flexed before breaking. This makes solid cat 5 cable perfect for permanent installation applications (long runs from patch panels to wall plates) where the cable will not move much once installed. Stranded is comprised of a PVC jacket and stranded core conductors making it very flexible. This flexibility allows

InfiniBand is a type of communications link for data flow between processors and I/O devices that offers throughput of up to 2.5 gigabytes per second and support for up to 64,000 addressable devices. Because it is also scalable and supports quality of service (QoS) and failover, InfiniBand is often used as a server connect in high-performance computing (HPC) environments. The internal data flow system in most PCs and server systems is inflexible and relatively slow. As the amount of data coming into and flowing between components in the computer increases, the existing bus system becomes a bottleneck. Instead of sending data in parallel (typically 32 bits at a time, but in some computers 64 bits) across the backplane

Infiniband Frequent Questions - Q & A

---

  Q: Is InfiniBand designed strictly as an I/O fabric? A: No, InfiniBand offers much more. At the lowest layer, InfiniBand provides a high performance, low latency, reliable switch

Where do they buy Cisco compatible Cables?

Where else ConnectZone.com as everyone knows is the best source for cables for Custom cables as well as many other Cables and Fiber Optics

Several times this year a sales engineer has called Connectzone.com looking for a cable that no one else had in stock ; and as always Connectzone shipped the cables the same day saving some geeks project again. This time the cable was a CAB-L520P-C19-US cable but the time before they couldn’t locate a CAB-HD8-ASYNC

Cables for Wireless Lan

Connectzone.com supplies many cables for wireless LAN (local Area Network) including the AIR-CAB Cisco Aironet coaxial antenna cable ; which is a RP-TNC Coax cable using LMR400 or LMR600 assembly. For instance the AIR-CAB-050LL-R allows you to place the Cisco Antenna 50 feet away from the Access point.

  wLAN (wireless Local Area Network)

10 foot CAB-OCTAL-MODEM Cisco equiv octal cable HD68 to 8x DB25 male

This is an eight-lead cable. Frequently, this style of cable is referred to as an octopus or octal cable. Each lead or tentacle of the octopus cable ends with 8x DB25 male. The other end, or base, of the cable has the 68-pin connector.

• CAB-OCTAL-MODEM
• Octal (octopus) cable
• Connector 1: HD68 male
• Connector 2: 8x DB25 male
• Length: 10 feet

Connectzone also stocks  cables for Cisco Equipment please Click here Cisco Cables. ConnectZone.com is located in Lynnwood Washington just 20 minutes north of Seattle, & Bellevue & Redmond Washington; in the greater Puget Sound area & can be contacted by the following means.

More Coaxial Cables: 59-100-03 59-100-06 59-100-100 59-100-12 59-100-15 59-100-150 59-100-25 59-100-75 CL400-NF-NM-25 CL400-NFB-NF-25 CL400-NFB-NM-25 CL400-NM-BNC-20 CL400-NM-NF-6 CL400-NM-NM-10

(AUI) Attachment Unit Interface Cable

Our line of office-style ethernet drop cables are the ultimate in price and performance. The ethernet transceiver cable usually connects a transceiver (connected to the Thicknet backbone) directly to a station, or to a hub. The screw lock form a dependable physical connection between cable and hardware. This cable is sometimes called an AUI cable because it often connects to the attachment unit interface (AUI) on an ethernet network interface card. Office-style AUI cables are known for their high level of flexibility which makes them easy to install in an office environment.

• Connector 1: DB15M (male)
• Connector 2: DB15F (female)
• Networking
• Transceiver cable
• Office type

   

Optical Fiber Cables

visit us: www.ConnectZone.com

Quick Links 10G Fiber Cable Angled/Ultra Polished Fiber Cable