lc

  1. Product Spotlight - Fiber Media Converters

    Fiber Media Converter Connectzone

    Product Spotlight - Fiber Media Converters


    Fiber media converters are simple networking devices that make it possible to connect two dissimilar media types such as twisted pair with fiber optic cabling. They were introduced to the industry nearly two decades ago, and are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems. They are also used in MAN access and data transport services to enterprise customers. The 10/100/100M Gigabit Ethernet Media Converter series is designed to meet the massive needs for network deployment and able to extend a copper based Fast network via fiber cable to a maximum distance up to 100KM. Our 10/100/100M Gigabit Ethernet Media Converter is fully compliant with IEEE802.3, Ieee802.3U, 10/100/1000Base-TX, 1000Base-FX, standards. Check out our wide selection of Fiber Media Converters here. Features:
    Read more »
  2. FCA Fiber Attenuators in Lynnwood

    Fiber Attenuators in Lynnwood

    Connectzone.com stocks Fiber Optic Attenuators in Lynnwood Washington just minutes away from Seattle, Bellevue, and Redmond Washington.

    FC APC Attenuator

    Fiber Attenuators allow you to reduce the optical signal strength so the data can be heard on the far side (receiving side)

    Read more »
  3. 10g 50/125 OM3 Multi-mode Aqua Fiber Optic Cable Starting at $17.99

    10g 50/125 OM3 Multi-mode Aqua Fiber Optic Cable Starting at $17.99

    50/125 is one of the most commonly used multimode optical fiber; the other commonly used is 62.5/125 types. The 50 and 125 is measurement by the unit micron. One meter is equal to one million micron. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua.
    Information
    • 10G OM3 MMF
    • Aqua Fiber Optic Cable
    • Multi-mode
    • Duplex
    • 50/125
    • Avaiolable Connectors: LC, SC
    Read more »
  4. Fiber Media Gigabit Converters LC/SC/ST to RJ45 Multi-mode or Single-Mode 10/100/1000Base-T

    Fiber Media Converters

    The 10/100/100M Gigabit Ethernet Media Converter series is designed to meet the massive needs for network deployment and able to extend a copper based Fast network via fiber cable to a maximum distance up to 100KM. Our 10/100/100M Gigabit Ethernet Media Converter is fully compliant with IEEE802.3, Ieee802.3U, 10/100/1000Base-TX, 1000Base-FX, standards. Features:
    • 10/100/1000Base-FX Converter
    • standards: IEEE802.3, IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX
    • Interface: 1xRJ45 connector 1xSFP slot
    • Flow Control: TEEE802.3x flow control for fullduplex mode. Back-pressure flow control for half duplex model
    • LED: Power, FX, FX-LINK/ACT, TDX/COL, 1000M, TX-Link/ACT
    Tech Specs:
    • Standard Protocol: IEEE802.3 10 Base-T standard 802.3u 100Base-TX/FX standard
    • Connector: one RJ-45 connector, LC, SC, ST fiber connectors
    • Operation Mode: Full
    Read more »
  5. APC Angle Polished and UPC Ultra Polished 9/125 Singlemode Duplex Fiber Optic Patch Cable

    We have known that PC, UPC, APC is standard of the fiber optic connectors, PC, UPC, APC are short for: Physical Contact (PC), Ultra Physical Contact (UPC), and Angled Physical Contact (APC), they are actually the polish style of fiber optic ferrules. Below is a picture of the fiber optic ferrules. Unlike copper cables with copper thread in the connectors as connection media, fiber optic connectors are with these ceramic ferrules for connection, and different fiber optic connectors the ferrule size and length and polish styles are different, as can be seen on the picture. Such ferrules is inside the fiber optic connectors and with fiber glass from the fiber optic cable to plug into the ferrule for linking.  The different polish of the fiber optic connector ferrules result in different performance of them, mainly on the back reflection (return loss),.Generally, PC type is required at least 40dB return loss or higher, UPC is 50dB or higher, APC
    Read more »
  6. 15454-MPO-8LC-2 Cisco 15454 Cable Assembly MPO 8 Fiber

    15454 MPO 8LC PIC1 resized 600

    15454-MPO-8LC-2 Cisco 15454 Cable Assembly MPO 8 Fiber Ribbon to 8 LC/PC SingleMode  Length: 2.3 Meters

    Other Cisco Cables you may be interested in: 15454-CONSOLE-02 15454-MPO-8LC-2 15454-SMB-BNC 2CBLE-SMB-BNC-F 2CBLE-SMB-BNC-M ACS-ASYN-C AIR-CAB-003LL-R AIR-CONCAB1200
    Read more »