apc

  1. Inline Fiber Optic Attenuators UPC & APC

    An optical attenuator is a device used to reduce the level of an optical signal, either in free space or in an optical fiber. They are commonly used in fiber optic communications. Optical attenuators used in fiber optic communications systems may use a variety of principles for their functioning. Those using the gap loss principle are sensitive to the modal distribution ahead of the attenuator, and should be used at or near the transmitting end, or they may introduce less loss than intended. Optical attenuators using absorptive or reflective techniques avoid this problem. Because an air gap is subject to variations from contamination etc, attenuators without air gaps (based on doping etc) are more stable over time. The basic types of optical attenuators are fixed, step-wise variable, and continuously variable.
    Read more »
  2. APC Angle Polish FC Fiber Optic Attenuators

    angle polished fiber optic attenuator fca

    Inline Fiber Optic Attenuators

    An optical attenuator is a device used to reduce the level of an optical signal, either in free space or in an optical fiber. They are commonly used in fiber optic communications. Optical attenuators used in fiber optic communications systems may use a variety of principles for their functioning. Those using the gap loss principle are sensitive to the modal distribution ahead of the attenuator, and should be used at or near the transmitting end, or they may introduce less loss than intended. Optical attenuators using absorptive or reflective techniques avoid this problem. Because an air gap is subject to variations from contamination etc, attenuators without air gaps (based on doping etc) are more stable over time. The basic types of optical attenuators are fixed, step-wise variable, and continuously variable. Inline attenuators are incorporated into patch cables. The alternative 
    Read more »
  3. APC Angle Polished Fiber Jumpers

    APC Angle Polished Fiber Jumpers

    APC SC Fiber Fiber connectors with angle polished APC finishes are a very popular choice in the market today. APC finishes are made by polishing the fiber at an angle. The endface is polished at an 8-degree angle to the fiber cladding so that most return loss is reflected in to the cladding where it cannot interfere with the transmitted signal or damage the laser source. By angle polishing the fiber, reflections at the fiber-air interface are greatly reduced. Back reflection levels are stabilized, feedback issues are reduced. Single mode APC patch cords
    Read more »
  4. APC Angle Polished and UPC Ultra Polished 9/125 Singlemode Duplex Fiber Optic Patch Cable

    We have known that PC, UPC, APC is standard of the fiber optic connectors, PC, UPC, APC are short for: Physical Contact (PC), Ultra Physical Contact (UPC), and Angled Physical Contact (APC), they are actually the polish style of fiber optic ferrules. Below is a picture of the fiber optic ferrules. Unlike copper cables with copper thread in the connectors as connection media, fiber optic connectors are with these ceramic ferrules for connection, and different fiber optic connectors the ferrule size and length and polish styles are different, as can be seen on the picture. Such ferrules is inside the fiber optic connectors and with fiber glass from the fiber optic cable to plug into the ferrule for linking.  The different polish of the fiber optic connector ferrules result in different performance of them, mainly on the back reflection (return loss),.Generally, PC type is required at least 40dB return loss or higher, UPC is 50dB or higher, APC
    Read more »
  5. FC APC Fiber Optic Attenuators Angle Polish

    Fiber Optic Inline Attenuators FC APC Polish FC APC Fiber Attenuator   ConnectZone.com stock IS9001 FC APC Fiber Optical Single Mode Inline Attenuators from 1dB to 20dB. The ConnectZone.com FC Angle Polish Connectors are built to exceed telecordia standards.
    Read more »